Skip to content
WOOD PROJECT LAB

Beginner Woodworking Projects

Projects organized by skill level, size, purpose and tools.

  • Illustration of a simple wooden wall shelf supported by two black metal brackets
    BeginnerPlan available

    Simple Wall Shelf

    A 24-inch bracket shelf with a full materials list, bracket placement dimensions and a step-by-step installation sequence.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • V1.0 design rendering of the Simple Wooden Phone Stand
    BeginnerPlan available

    Simple Wooden Phone Stand

    A dimensionally checked three-part plan with a full cut list, technical drawing and step-by-step instructions.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Small DIY cedar wooden patio planter box with removable nursery pots.
    BeginnerPlan available

    Simple Wooden Patio Planter Box

    A low cedar planter, 24" × 10" × 11", with a removable slatted bottom for small nursery pots, a full cut list and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design illustration of the V2.0 pine storage crate: two solid plywood end panels, three open side slats per long side and a fixed three-board bottom
    BeginnerPlan available

    Wooden Storage Crate

    An open-top pine and plywood slatted crate, 18" × 12" × 10", with a full cut list, seven assembly steps and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design illustration of two matching L-shaped pine bookends with horizontal bases and a reinforcing cleat in each inside corner
    BeginnerPlan available

    Wooden Bookends

    A matching pair of L-shaped pine bookends, 5½" × 6" × 6¾" each, with an inside cleat, a six-piece cut list, seven steps and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design illustration of a rectangular natural-pine serving tray with a flat plywood bottom, four low raised sides and no handles
    BeginnerPlan available

    Wooden Serving Tray

    A handle-free pine and plywood tray, 16" × 10" × 2¼", with a five-piece cut list, ten-nail fastening schedule, seven steps and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design rendering of a simple natural-wood chickadee nesting box with a sloped roof, a single round entrance hole and no perch
    BeginnerPlan available

    Simple Wooden Birdhouse

    A Carolina Chickadee nesting box with a 1⅛" entrance, sloped roof, drainage and ventilation holes, a removable cleanout side and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design rendering of an open-top natural-wood carpenter’s tool tote with two low long sides, two taller end panels and a centered round dowel handle passing through the ends
    BeginnerPlan available

    Wooden Tool Box

    A traditional open-top carpenter’s tool tote, 16" × 8" × 10", with two tall ends, low long sides, a through-mounted dowel handle, a four-piece cut list, eight steps and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner
  • Design rendering of four matching square birch plywood coasters arranged on a tabletop
    BeginnerPlan available

    DIY Wooden Coasters

    A set of four 4" × 4" × ¼" birch plywood coasters made from a 5" × 20" scrap panel, with a one-line cut list, eight steps, finishing guidance and a free printable plan.

    Difficulty
    Difficulty: 1 out of 3,Beginner